Item No: CMF003
For: Jura Claris; Bosch; Siemens
Cert.: NSF/ANSI Standard 42/372
Chlorine Removal Rate: 99%
Filtration Life: 2 Month/ 50 Gallons (Depends on water quality and level of contaminants)
OEM & Private Label Making: Support
Place of Dispatch: Los Angeles
Please contact us for your demands.
Prepare the Cartridge
Thoroughly wash hands prior to handling the filter.
Remove the cartridge from the polybag this packaging is recyclable and can be disposed of with most household plastics.
Using a clean bowl filled with fresh cold water, submerge the cartridge and shake it to release any trapped air within the filter.
Fit the Cartridge
Remove the water tank from coffee machine and discard any remaining water.
The existing cartridge may be held in place with a spacer which bridges the gap between the top of the filter and the top of the tank.
Lift the cartridge spacer from the top of the filter and put the spacer to one side.
This will be needed for the new filter.
The old filter can then be lifted straight upwards from the bottom of the tank.
Discard the old filter
Taking the new filter, fit the spacer over the top(if applicable) then seat the new cartridge back into the tank. The mount in the tank has a " hexagonal shape" and you must ensure the hexagonal inlet on the filter is aligned with this accordingly and the filter is fully pushed down over it.
Flush and Prepare
Close or refit the lid, ensuring the top of the spacer( here fitted)meets the recess inthe lid of the water tank, holding the filter in place.
Fill the water tank with clean cold water.
Refit the water tank to the coffee machine.
Rinse the filter, either by running the cartridge change/flush procedure on your coffee machine or for machines without this facility by vending the first full tank of water through as hot water only (without using coffee).